SYS | mmHg |
DIA | mmHg |
Puls | 1 / min |
|
|
Upper (systolic) value
Lower (diastolic) value
Pulse
Important
15 seconds after switching on the device the measuring process will begin automatically, even if the appropriate measuring position has not been reached.
If at any time you want to discontinue the measurement, press the I/0 button.
Memory
(only for model BP 2510 with memory button)
The readings of the last 20 measurements will be saved automatically.
To recall the latest stored reading, press the memory button. Repeatedly pressing the memory button will call up one by one all stored readings. The number in the upper left corner of the display gives the memory position (01 being the oldest, 19 the most recent).
beep |
De-activating the active positioning system
At the time of manufacture, the position sensor has been activated. If you wish, you can
The necessary select button (D) is placed underneath the battery compartment cover.
First turn off the monitor, then press the select button until an acoustic signal sounds. On the display the «on» next to the symbol of the position sensor « 
» will flash.
By pressing the I/0 button, you
8
