Braun BP 2510, BP2005 manual Turning off the product, Storage and cleaning, Calibration

The display will change from «on» to «- -» (off).

To re-activate the sensor, press the I/0 button again.

Confirm your settings as follows:

Model BP 2510: press the memory button.

Model BP 2005: press the select button for several seconds.

Turning off the product

Press the I/0 button to turn the product off. Otherwise the product will turn off automatically after 2 minutes.

Storage and cleaning

Clean the housing of the product with a damp, soft cloth. Stains on the cuff (G) can be carefully removed with a damp cloth. Do not wash or dry clean the cuff. Do not store the product in a place exposed to direct sunlight or high humidity. Do not submerge in water and do not spill liquids on the device.

Calibration

This product has been calibrated at the time of manufacture. If used according to the use instructions, periodic re-calibration is not required. If at any time you question the measuring accuracy, please call 1-888-848-2572.

Manufacturing date is given by the LOT number on the back of the product.

The first number after LOT represents the last digit of the year of manufacture.

The next three digits give the day of the year of manufacture.

An example: LOT 0116 xx xx – this product has been manufactured on the 116th day of the year 2000.

9