GB | How to use Braun ThermoScan |
1.
To achieve accurate readings, make sure a new, clean lens filter is in place before each measurement.
2.
IRT 4020: Push the «start» button.
IRT 4520: Push the «I/O» button.
Then wait for the ready signal beep and the ready symbol in the display.
➘ | 3. |
Fit the probe snuggly into the ear canal, then push | |
the «start» button. |
4.
If the probe has been positioned securely into the ear canal during the complete measuring process, a long beep will signal the end of the measuring process. You can be assured to have taken an accurate temperature reading. The result is shown on the display.
If you take the temperature of another person, the «ExacTemp» light can be of help. It flashes during the measuring process as long as the probe is securely positioned, and lights up continuously when an accurate reading has been taken.
