Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy the new Braun appliance.
Caution
•Read all instructions carefully before using this product.
•This product is suitable for normal household use only and not for commercial use.
•Keep out of children’s reach.
•This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
•Do not reach into the filling shaft while the motor is running. Always use the pusher to guide food through the shaft.
•Remove plug from socket before assambling or disassembling appliance.
•Braun electric appliances meet applicable safety standards. Repairs on electric appliances must only be done by authorized service personnel. Faulty, unqualified repair work may cause accidents or injury to the user.
•The mains cable of this appliance can only be changed by an official Service dealer, since it requires a special tool.
Specifications
•Voltage/wattage: See typeplate on the bottom of the appliance.
•Safety system: The appliance can only be switched on when the cover has been fully locked into position and can only be opened when the switch has been turned off.
•Motor stop: The motor will stop completely within 2 seconds of switching the appliance off.
Safety fuse
If the appliance is overloaded the safety fuse will cut out. To restart the appliance:
•Turn the switch 2 off = «0» (important!).
•Unlock and remove the cover 7 .
•Clean the juice ring 5 , filter 6 and cover 7 .
•Allow the appliance to cool down approx. 20 minutes.
•Assemble the juicer again.
•Turn the switch 2 on = «/».
•If the appliance still does not run, allow it to cool down again.
Description
1Motor part
2On/off switch
3Unlocking buttons
4Pulp container
5Juice ring
6Filter
7Cover
8Filling shaft
9Filling tray
10Pusher
11Juice spout
12Juice container with foam separator
13Cord storage
Before using for the first time, wash the juicer parts (see «Disassembling» and «Cleaning»).
Assembling
1.Put the juice ring 5 on the motor part 1 (fits loosely without engaging).
2.Lay the filter 6 into the juice ring 5 .
3.Put the cover 7 on and push down firmly with both hands until your hear it snap into place.
4.Hang the pulp container 4 into the hinges (the top one first); then close it and be sure it snaps into place.
5.Put the juice container 12 underneath the juice spout 11 (A). Capacity: 500 ml/16.9 fl. oz. The juice container comes with a foam separator to ensure clear
6.For easier filling, put the filling tray 9 on top of the filling shaft 8 (A).
Preparing fruit or vegetables
Important: Use only well ripened fruits, otherwise the filter 6 may be clogged up which would result in repeated cleaning of the filter. Wash or peel the fruit or vegetables you want to process. Fruit with large pips or stones should always have these removed first. Process seed fruit (such as apples, pears) with peels and cores. Fruit and vegetables with thick peels (e. g. citrus fruits, melons, kiwis, beets) must be peeled first. For grapes, cut off the main stem. For leaf vegetables (e. g. cabbage and spinach) and herbs, roll up leaves together tightly. Cut fruit and vegetables into pieces large enough to fit into the filling shaft.
Currants and rhubarb are not suitable for making juice in this juice extractor.
