English

Our products are engineered to meet the highest standards of quality, func- tionality and design. We hope you thoroughly enjoy your new Braun appli- ance. Please read the use instructions carefully before usage.

The Braun smoothliner is designed to straighten and protect your hair.

It comes with NanoGlide Ceramic Tech- nology for advanced hair protection and smoothest glide.

Since the NanoGlide Ceramic plates are 3 times smoother than conventional ceramic plates, they protect your hair from damage by providing friction-free gliding. Your hair will look naturally healthy and shiny.

Important

Do not expose to temperatures of more than 50 °C (e.g. glove compart- ment of cars), nor direct sunlight for long periods of time.

Keep out of reach of children.

Do not allow the appliance to get wet.

When starting the appliance please ensure that it is held away from the hair, face and clothing.

Do not start the appliance while it is in the hair.

Use Braun energy cells only. Energy cell contains flammable isobutane gas under pressure.

Keep away from flames (burning cigarettes as well).

Avoid touching the hot parts of the product.

When hot, do not place on surfaces that are not heat resistant.

Do not take apart, puncture or incin- erate.

If the appliance is damaged, stop using it immediately. For repairs refer to authorised Braun Service Agents only.

Use the appliance on dry hair only.

Description

AProtective cover

BEnergy supply / start switch («0» = off, «1» = on)

CIgnition window

DReady indicator dot

ECool touch ribs

FClamp

GRelease button for handle

HHandle (two sizes available)

Before use

Removing the protective cover

Press the cool touch ribs (E) to release the protective cover (A) and remove it.

Inserting or changing the Braun energy cell

This appliance can be used with both, a short handle for styling on the go and a long handle for use at home. The short handle accommodates the small energy cell (a), while the large energy cell (b) fits into the long handle.

In order to insert or change the energy cell, the energy supply must be switched off (switch (B) on position «0»).

Press the release button (G) to pull off the handle (H).

Insert a Braun energy cell into the handle (arrows on energy cell point- ing outwards).

Push the handle back onto the appliance until it snaps into place.

Only use Braun energy cells. These are available from the shop where this appliance was purchased, as well as from authorised Braun Service Agents. The energy cells can be taken out or changed at any time, even if they are only partly filled.

8

Page 8
Image 8
Braun MS 1 English, Description, Removing the protective cover, Inserting or changing the Braun energy cell, Before use