Braun PV 2002, PV 2010 manual Decalcifying / Self-cleaning, Ironing Guide, Guarantee, For UK only

Models: PV 2005

1 4
Download 4 pages 24.86 Kb
Page 4
Image 4
Decalcifying / Self-cleaning

Decalcifying / Self-cleaning

Braun Combi-jet irons have a built-in system (anti-calc. valve) to prevent calcification. It allows you to clean residues from the steam chamber. Do not use commercial decalcifiers; they may damage the sole plate. We recommend to use the self-cleaning function every 3 months.

1.Turn the steam regulator 4to the position «» (= steam off).

2.Fill the water tank to the marking «max.» L and turn the temperature selector 1 to the

●●● marking («self-cleaning» = SC) (A).

3.Plug the iron into the socket and wait till the pilot light 8 goes off.

4.Unplug the iron and hold it over a sink.

5.Turn the steam regu- lator 4 clockwise to the end of the red marking (B) and then

6.keep turning in to the

double-arrow marking

Ironing Guide . The steam regu- lator will lift (C).

7.Pull out the steam regulator together with the valve vertically (D). Do not touch the lower end of the anti-calc. valve with your fingers, to avoid a possible greasy film.

8.Allow all water to drain through the steam vents in the sole plate, while shaking the iron slightly. (Caution: Hot water and steam come out from the sole plate.)

9.Wait for the sole plate to cool down and then clean it (see «Maintenance and Cleaning»).

10.Make sure that the sole plate is completely dry before storing it.

Cleaning the anti-calc. valve on the steam regulator

During the time the sole plate is cooling down we recommend to decalcify the anti-calc. valve in the following way:

1.Put a small quantity of white vinegar (not vinegar essence) or lemon juice into a glass or bowl.

2.Immerse just the bot- tom part of the valve in the liquid, wait till it is decalcified and care- fully brush of remain- ing residue (E).

Do not use a metal brush.

3.Then, rinse it under

running water without touching the lower end of the valve.

Re-inserting the steam regulator with anti-calc. valve

1.Re-insert the steam regulator so that the double-arrow Guarantee aligns with the marking on the iron (F).

2.Then push it down carefully and at the same time turn the button anti-clockwise.

3.Keep turning the button to the marking «»

(= steam off).

4.If your iron has the shot of steam, refill the tank with water, heat the iron up and press the button 7 3 to 4 times in the shot of steam

function before ironing, to rinse the iron.

ATTENTION: The iron must not be used without the steam regulator and the anti-calc. valve.

Ironing Guide

To begin ironing, it is best to start with fabrics requiring a lower temperature (e. g. synthetics), and continue with those requiring a higher temperature (e. g. cotton, linen).

Silk and silk-like synthetics tend to waterspot, therefore before using the water spray feature, test it on an inconspicuous spot first.

Fabrics

Temperature

Steam

 

regulator

regulator

 

setting

setting

 

 

 

Synhetics

(= steam off)

(acrylic, acetate)

 

 

 

 

 

Silk, rayon,

●●

(= steam off)

nylon, polyester,

 

to max.

cotton blends

 

 

 

 

 

Wool

●●

(= steam off)

 

 

to max.

 

 

 

Cotton

●●●

(= steam off)

 

 

to max.

 

 

 

Linen

●●●

(= steam off)

 

to max.

to max.

 

 

 

Mixed fabrics: Always select the temperature suited for the most sensitive fibre the garment contains. Follow manufacturer’s instructions on the label.

Subject to chance without notice.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC.

Guarantee

We grant a 1 year guarantee on the product commencing on the date of purchase.

Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in material or workmanship either by repairing, or exchanging parts or exchanging the whole appliance as we may choose.

Not covered by this guarantee: damage arising from improper use or storage (operation with incorrect current/voltage, plugging it into an unsuitabie power point, breakage use of commercial decalcifyers, wet storage on the ironing surface), normal wear and defects which have a negligible effect on the value or operation of the appliance.

The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used.

The guarantee only comes into force if the date of purchase is confirmed by the dealer's stamp and signature on the guarantee card and registration card.

This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor and where no import restrictions or other legal regulations hinder or prevent service being given under guarantee.

Service under the guarantee does not affect the expiry date of the guarantee. The guarantee on parts or entire appliances which are exchanged ends when the guarantee on this appliance expires.

In the event of a claim under this guarantee, hand in the complete appliance with the valid guarantee card to your dealer, or send both to the nearest Braun Customer Service Centre.

All other claims including for damages resulting from this guarantee are excluded unless our liability is legally mandatory.

Those claims arising out of the sales contract with the vendor are not affected by this guarantee.

For UK only:

This guarantee in no way affects your rights under statutory law.

6

7

Page 4
Image 4
Braun PV 2002, PV 2010, PV 2005 manual Decalcifying / Self-cleaning, Ironing Guide, Guarantee, For UK only