Using the rotating styler
The wide shaper (4a) evenly cuts and trims large areas (c). It is ideal for shaping sideburns, moustaches and partial short beards. The wide shaper is provided with safety rips and a gliding strip for less irritation and easy gliding. Press the blue stripes to push up the rotating styler (4).
While stretching the skin, guide the wide shaper against the direction of hair growth.
The narrow shaper (4b) precisely defines lines and edges (d), being ideal for precise contouring.
To use the narrow shaper, push up the styler and turn it 180°.
Frequent use of the styler will reduce the battery capacity.
Using the trimming attachment
•The trimming attachment (7) is ideal for beard trimming and keeping it at a constant length.
•Place the trimming attachment onto the shaver foil (2) and press it against the shaver housing until it snaps into place with a click.
•Press the beard length selector (8) (e) and slide it up in order to set the desired beard length (length settings from top to bottom 1.2 mm, 2.8 mm, 4.4 mm, 6 mm). Push up the styler (4).
•Activate the on/off switch and trim against hair growth by guiding the transparent comb part over the skin.
Cleaning
Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:
•Switch the shaver on (cordless) and rinse the shaving head under hot running water (f). A natural based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
•Next, switch off the shaver, remove the shaver foil and the cutter block. Then leave the disassembled shaving parts to dry.
•If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil (h).
13
