Bravetti BB301 owner manual Blender Parts And Care, Cover, Container, Processing Assembly

BLENDER PARTS AND CARE

BLENDER PARTS AND CARE

COVER

The cover for your blender consists of two parts, the plastic feeder cap and the vinyl cover. The cover is self-sealing, and is made of vinyl which is resistant to absorption of odors and stains. The feeder cap is removable for use as a measuring cup and provides an opening for the addition of other ingredients.

CONTAINER

The container for the blender is graduated for easy measurement and is made of glass. The convenient handle and pouring lip permit easy removal of liquid mixtures while thicker mixtures are more easily removed through the bottom opening. The glass jar is marked with indicators for convenient measuring.

PROCESSING ASSEMBLY

The processing assembly consists of three parts: a sealing ring used as a cushion between the container and the agitator; agitator of high-grade stainless steel; a threaded container bottom.

MOTOR AND MOTOR BASE

The powerful multi-speed motor is the heart of the appliance and is designed just for this unit. It is completely enclosed within the housing.

ASSEMBLING YOUR BLENDER

CAUTION: Follow these important steps to assemble, tighten, and mount blender container quickly and correctly. INJURY MAY

RESULT IF MOVING BLADES ARE EXPOSED.

1.Turn container up-side down so the small opening is at the top.

2.Make sure that the sealed ring on container opening is tight.

HOW YOUR BRAVETTI BLENDER WORKS

Your blender is a multi-speed appliance which operates on a wide range of speeds from very slow to very fast. This range of speeds makes food preparation easy, interesting and also saves time because your blender processes foods in seconds.

ALWAYS HOLD CONTAINER WITH ONE HAND WHILE PROCESSING!

LOW SPEED MODES includes PUREE, WHIP and MIX functions. HIGH SPEED MODES include GRATE, BLEND and LIQUEFY functions. By touching the control buttons, you can get the speed mode you need.

Another choice is PULSE to crush ice.

1.Follow assembly steps as described above.

2.Fill container with 2 cups of ice cubes.

3.Place lid assembly on container.

4.Spin the knob to the ICE CRUSH/PULSE position.

5.Ice can be crushed by continuously spinning the knob until desired consistency is reached.

6.Let go of the knob and let it revert to the OFF position automatically. Unplug appliance.

7.Remove container from blender base.

3

4