CLEANING & MAINTENANCE
CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning.
IMPORTANT SAFEGUARDS
Read Instruction Manual Before Use
When using electrical appliances, basic safety precautions should always be followed, including the following:
Re-settable Thermal Safety Device
Your Bravetti Platinum Pro Food Processing Center has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system. Should this occur during use and the appliance stops functioning, following is the
1.Turn the “ON/OFF” speed control to the “OFF” position
2.Unplug the unit from the wall receptacle.
3.Remove and empty the processor bowl. Ensure that no food is jamming the cutting blades or attachments.
4.Allow the appliance to cool down for a minimum of 30 minutes.
5.
6.Proceed to use the appliance as before. Should the appliance still fail to operate, turn the “ON/OFF” speed control to the “OFF” position and unplug from the wall outlet. Allow the appliance to cool down for an additional 1 to 2 hours. After this time has passed, repeat the restart procedure, steps 5 and 6 above.
1.Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference.
2.Your voltage must correspond to the voltage printed on the bottom of the appliance.
3.To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in water or other liquid.
4.Close supervision is necessary when the appliance is used by or near children.
5.Unplug appliance from outlet when not in use, before putting on or taking off parts and before cleaning.
6.Avoid touching moving parts at all times.
7.Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to
8.The use of attachments including canning jars not recommended by the manufacturer may cause fire, electric shock or injury to persons.
9.Do not use outdoors.
10.Do not let cord hang over edge of table or counter or touch hot surfaces.
11.Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.
12.Blades are sharp. Handle carefully. When handling the chopper blades
always hold it by the plastic hub.
13.To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place.
14.Be certain cover is securely locked in place before operating appliance.
15.Never feed food by hand. Always use food pusher.
16.Do not attempt to
17.Always operate food processor with the cover in place.
18.Always operate the blender with the cover in place.
19.When blending hot liquids, remove the center piece of the
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONSFOR HOUSEHOLD USE ONLY12 | 1 | REV. 01/05A |
|
