Operating Instructions
GETTING TO KNOW YOUR
VARIABLE SPEED QUAD BLADE FOOD PROCESSOR
Speed Control Dial
The speed control dial has the following speed settings:
•Off: Turn the speed control dial to “Off” in order to stop the food processor from operating.
•1 to 9: Speed levels may be increased from 1 to 9. The speed can be adjusted while the food processor is in use.
•Max: Highest level of speed that the food processor can operate at.
•PULSE: Use of the “PULSE” button allows greater control over the texture of the food being processed. Use "PULSE" when the unit is in the "Off" position.
Caution: The "PULSE" function is only intended to be used for short periods of time. Damage to the unit may occur if not used properly.
Operating the Food Processor
Once having assembled the food processor according to the “Assembly Instructions” the unit is now ready for use.
1.Place the lid on top of the food processor bowl. Once in place twist it to the left so that it is locked securely. (Fig. 8)
Note: Until the lid is securely in place, ensure that the unit is NOT plugged into an electrical outlet.
TWIST THE LID TO THE LEFT
TO LOCK INTO PLACE
2.Plug in the processor and turn the speed control dial to the desired speed level. If the processor does not come on check that the lid are correctly fitted and locked into place.
Important Note: The unit will NOT operate without the lid locked into place.
3.Use the food pusher when putting food into the feeder tube. (Fig. 9)
For safety reasons it is always better to use the food pusher, and to NEVER feed food by hand.
Caution: DO NOT operate the unit for intervals longer than 20 seconds. If longer chopping or mixing is required, run for 20 seconds, allow motor to stop and run again for another 20 seconds.
FOOD |
PUSHER |
FEEDER |
TUBE |
Fig. 9
4.When finished using the food processor, turn the speed control dial to the “Off” position and unplug it from the electrical outlet.
1.Food Pusher
2.Feeder Tube
3.Food Processor Bowl
4.Suction Feet
5.Speed and Pulse Control
6.Blade Storage Compartment
7.Food Processor Lid
8.Blade Holder
9.Thin Shredding Blade
10.Thick Shredding Blade
11.Thin Slicing Blade
12.Thick Slicing Blade
13.Grating Blade
14.Upper Chopping Blade
15.Blade Covers (x2)
16.Lower Chopping Blade
17.Spatula
SPEED AND PULSE
CONTROL
Speed
Control
Dial
OFF to
MAX
Pulse Button |
Technical Specification
Fig. 8
Voltage: | 120V., 60Hz. |
Power: | 800 Watts |
Food Processor Capacity: | 6 cups (1.5 L) |
* Illustrations may differ from actual product.
6 | 3 |
