Bravetti K4305H Technical Specifications, Getting To Know Your Deep Fryer, Operating Instructions

GETTING TO KNOW YOUR DEEP FRYER

OPERATING INSTRUCTIONS

1.	Lid Handle	10.	Main Housing
2.	Air Outlet Vent	11.	Basket Handle
3.	Glass Lid	12.	Frying Basket
4.	Power “ON” Indicator Light	13.	Guide Rails
5.	Temperature Ready Light	14.	Moisture Container
6.	Temperature Control Knob	15.	Magnetic Power Cord
7.	Control Panel	16.	Magnetic Power Cord Socket
8.	Heating Element	17.	Reset Button

9.Glass Oil Container

Technical Specifications

Voltage:	120V., 60Hz.
Power:	1800 Watts
Oil Capacity:	3 Liters

2

Cleaning Instructions

Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil

to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or any other liquid.

•Follow the cleaning instructions on page 3. (Before using for the First Time)

•Never immerse the control panel, cord or plug in water or any other liquid.

•Do not place the control panel, cord or plug in the dishwasher.

•Clean the control panel only with a damp cloth.

•The frying basket, glass lid with the filter can be washed in the dishwasher.

•Wash the glass oil container with warm, soapy water. Do NOT place in dishwasher.

•The body of the deep fryer can be washed in warm soapy water. Do not put the body of the deep fryer in the dishwasher.

•After washing the glass lid, make sure that it is free of any water. See illustration below for best position to drain water from the glass lid.

•Any other servicing should be performed by EURO-PRO Operating

LLC.

Detachable Magnetic Power Cord

Your Deep Fryer has been specifically designed with your safety in mind. Your deep fryer has a unique detachable power supply cord. This power supply cord cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.

7

The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel.

To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180°

IMPORTANT: Should the male plug become detached from the appliance during use, it is important to:

1.Unplug the power cord from the wall outlet.

2.Turn the temperature control knob to the lowest heat setting.

3.Re-attach the power cord to the appliance.

4.Re-connect to power outlet.

5.Turn the temperature control knob

to the desired temperature setting.

How to Reset the Deep Fryer

If for some reason the deep fryer stops heating, the reason might be that the safety reset switch has been tripped. To re-set the deep fryer, follow the following instructions:

1.	Turn the temperature control knob
	counter clockwise to the lowest heat
	setting.
2.	Remove the plug from the electrical
	outlet.
3.	Let the deep fryer cool for a
	minimum 15 minutes.
4.	Replace the power cord
	into the electrical outlet.	Reset
5.	Push the reset button
		Button

located on the side of the control panel. (see illustration)

6.Reset the temperature control knob to the desired heat temperature and proceed with frying.