Press this key...
INPUT
M1 M2 M3 M4
M5 M6 M7 M8
MUTE VOL- VOL+ ON/OFF
Programming a Device
To...
Switch the device input to view TV or video programs.
Directly enter channels (For example, 09 or 31). Press ENTER to send channel number entries on some TV models.
Macro device keys can be used to dedicate multiple string macro commands.
To control devices, A and B, follow these steps.
Before proceeding, find the codes for the devices you want to program in “Manufacturer’s Codes” in the following pages and write them down or highlight them.
NOTE: Any device may be set up on any mode key.
1.Turn on the device (for example, CD player) and, if needed, load media (for example, a CD).
2.Press a device key (A or B).
3.Press and hold SETUP until the red LED blinks twice, then release.
4.Enter the first
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
5.Aim the remote at the device and press POWER. The device should turn off. If it does not, repeat steps 3 to 5, trying each code for your brand until you find one that works. If you cannot find a code that works, see “Searching For Your Code”.
6.Repeat steps 1 to 5 for the other devices you want to control. For Future reference, write down each working device code below:
SOURCE A Code:
Desc. _______
SOURCE B Code:
Desc. _______
Searching For Your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code:
1.Press a device key once.
2.Press and hold SETUP until the red LED blinks twice, then release.
3.Enter 991. The LED blinks twice.
4.Enter the device group number:
Code Device Group
Cable (Cable Converters, Video Accessories, Satellite
0 Receivers).
1 TV (TVs)
2 | VCR (VCRs, DVD players) |
3 Audio (Audio Amplifiers, Audio Amp/Tuners, CD players)
5. Select a test function, such as POWER or PLAY. The remote sends IR codes from its library to the selected device, starting with the most popular code first.
2
