TROUBLESHOOTING GUIDE

27

GLASS “SOOT’S” UP AT A VERY FAST RATE

FLAME IS LAZY, DARK, AND HAS BLACK TIPS

AFTER STOVE HAS BEEN ON FOR A WHILE, THE BURNPOT OVERFILLS

Possible Causes:

Possible Remedies:

 

 

 

1.

Stove or vent pipe is dirty, which restricts airflow through the

Follow all cleaning procedure in the maintenance section of the

 

burnpot.

owner’s manual.

 

 

 

2.

Vent pipe installed improperly.

Check to make sure the vent pipe has been installed according to

 

 

the criteria in the owner’s manual.

 

 

 

3.

Air damper is set too far in (closed) for a higher setting.

Pull the damper knob farther out away from the side of the stove and

 

 

try to burn the unit again.

 

 

 

4.

Burnpot holes are blocked.

Remove the burnpot and thoroughly clean it.

 

 

 

5.

Air damper is broken.

Visually inspect the damper assembly. Make sure the damper plate

 

 

is attached to the damper rod. When the damper rod is moved the

 

 

plate should move with it.

 

 

 

6.

Blockage in air intake pipe.

Visually inspect the air intake pipe that leads into the burnpot for

 

 

foreign material.

 

 

 

7.

Circuit board malfunction.

Time the fuel feed light at each setting (after the stove has

 

 

completed the startup cycle). Make sure the times match the auger

 

 

timing chart. If the auger motor runs constantly, the board is bad.

 

 

 

8.

Combustion blower is not spinning fast enough.

Test the RPM on the blower after the blades have been cleaned.

 

 

The RPM should be approximately 3000 RPM.

 

 

 

9.

Bad Pellets

The brand of pellets or the batch of pellets that are being used may

 

(Applies to GLASS “SOOT’S” UP AT A VERY FAST RATE Only)

be of poor quality. If possible, try a different brand of pellets. You

 

 

might also want to try a brand that is made from a different type of

 

 

wood (softwood vs. hardwood). Different woods have different

 

 

characteristics when being burned.

 

 

 

10.

The trim setting on the low feed rate is to low

Use the “Reset Trim” button to increase the low feed rate setting. If

 

(Applies to GLASS “SOOT’S” UP AT A VERY FAST RATE Only)

the 1 & 4 are on, the stove is currently on the lowest setting. If only

 

 

the 1 light is on, the stove is in the default (medium) setting. If the 1

 

 

& 5 lights are on, the stove is in the high trim setting for the low feed

 

 

rate. If the stove is being burned on one of the two lower settings,

 

 

advance to the next trim setting and try burning the stove.

 

 

 

Page 27
Image 27
Breckwell P23I, P23FSA, P23FSL owner manual Troubleshooting Guide

P23FSL, P23FSA, P23I specifications

The Breckwell P23 series pellet stoves, comprising the P23FSA, P23I, and P23FSL models, are designed to provide efficient heating solutions while maintaining ease of use and aesthetic appeal. These stoves incorporate advanced technology features that set them apart in the modern heating market.

The Breckwell P23FSA model features a traditional freestanding design that blends seamlessly with any home decor. This model is equipped with a large viewing window, allowing users to enjoy the mesmerizing flames while benefiting from its high-efficiency heating capabilities. With a heating capacity of up to 2,000 square feet, it is an ideal choice for larger spaces. The P23FSA uses a digital control board that regulates the feed rate and blower settings, ensuring a consistent and reliable heat output. Additionally, it has a self-diagnostic system that alerts users to any operational issues, making maintenance straightforward.

The P23I, on the other hand, is designed for those seeking a built-in option. This insert offers the same heating capacity as its freestanding counterpart but is specifically made to fit into existing fireplaces, combining functionality with elegance. The P23I boasts a sleek design that enhances any room, while its adjustable blower ensures optimal heat distribution. The insert is also compatible with an optional wall thermostat, providing convenience and enhanced control over the heating schedule.

Lastly, the P23FSL model features a contemporary look with sleek lines and a compact design, ideal for smaller spaces without compromising on heating efficiency. This model includes a large hopper capable of holding up to 50 pounds of pellets, allowing for extended burn times and reduced refueling frequency. The P23FSL also incorporates a user-friendly control panel, providing adjustments at the touch of a button. Like the other models, it prioritizes efficiency, with a low emissions output that aligns with modern environmental standards.

All three models are built with high-quality materials to ensure durability and longevity. They utilize a pellet-burning process that significantly reduces environmental impact compared to traditional wood stoves, making them an eco-friendly heating option. With their combination of technology, efficiency, and aesthetic appeal, the Breckwell P23 series stands out as a top choice for homeowners looking for reliable and stylish heating solutions.