4

SAFETY INFORMATION

When operating your W3000FS and W3000I, respect basic safety standards. Read these instructions carefully and completely before beginning any installation procedures or attempting to operate the heater. Failure to do so may result in damage to property or personal injury and may void the product warranty.

CAUTION: WHILE THE STOVE IS BURNING, THE DAMPER ROD MUST BE FULLY OPEN BEFORE OPENING THE DOOR TO AVOID COMBUSTION FLASH.

Installation and repair of the W3000FS and W3000I Wood Stove should be done by a qualified service person. The W3000FS and W3000I, Chimney connector and chimney should be inspected by a qualified service person before the heating season, and at least once a month during the heating season to determine if a creosote build up had occurred.

Due to high surface temperatures, the W3000FS and W3000I should be located out of traffic areas and away from furniture and draperies.

Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoids burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the heater.

If the blower cover plate (W3000FS) or the optional blower assembly have been removed for service, they must be replaced prior to operating the heater.

WARNING: DO NOT OPERATE HEATER WITH THE GLASS PANEL REMOVED, CRACKED OR BROKEN. REPLACEMENT OF THE PANEL SHOULD BE DONE BY A LICENSED OR QUALIFIED SERVICE PERSON.

Ensure adequate combustion and ventilation air are provided, and that they are not obstructed.

CREOSOTE – FORMATION AND NEED FOR REMOVAL

When wood is burned slowly, it produces tar and other organic vapors, which combine with expelled moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue of a slow-burning fire. As a result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an extremely hot fire, which may damage the chimney or even cause a house fire. In the event of a chimney fire, CALL THE FIRE

DEPARTMENT IMMEDIATELY.

Before each heating season the entire chimney system should be professionally inspected, cleaned and, if necessary, repaired. The chimney connector and chimney should be inspected at least once a month during the heating season to determine if creosote build up has occurred. The chimney system should be inspected at the chimney connector and at the chimney top. Cooler surfaces tend to build creosote deposits quicker, so it is important to check the chimney from the top as well as from the bottom.

If creosote has accumulated it should be remove to reduce the risk of a chimney fire. The creosote should be removed with a brush specifically designed for the type of chimney in use. A qualified chimney sweep can perform this service.

Page 3 Page 5
Page 4
Image 4
Breckwell W3000 owner manual Safety Information, Creosote Formation and Need for Removal
Page 3 Page 5

W3000 specifications

The Breckwell W3000 wood burning stove is an exemplary choice for those seeking an efficient and stylish heating solution for their home. Renowned for its robust construction and innovative features, the W3000 stands out in the world of traditional wood stoves.

One of the W3000's main features is its large firebox capacity. With a generous size, it can accommodate logs up to 18 inches long, allowing for longer burn times and fewer reloads. This feature is especially beneficial for homeowners looking for convenience and extended warmth. The firebox is designed with a cast iron door and large glass window, providing an inviting view of the flames while enhancing durability.

The stove is powered by advanced technologies that maximize efficiency and minimize emissions. The W3000 utilizes a unique air wash system that keeps the glass clean, ensuring that the view of the fire remains unobstructed and enjoyable. This technology also helps maintain optimal combustion conditions, resulting in lower particulate emissions, which is a common concern with traditional wood-burning stoves.

An additional characteristic that sets the Breckwell W3000 apart is its heat output capabilities. With a heating capacity of up to 2,400 square feet, it is ideal for larger living areas or open floor plans. This impressive output is complemented by a variable speed blower that allows users to distribute heat evenly throughout the space, enhancing comfort and energy efficiency.

Durability is another hallmark of the W3000. Constructed from heavy-duty steel, it is built to withstand the rigors of daily use while maintaining aesthetic appeal. The stove is available in different finishes, including classic black and a more modern pewter, allowing homeowners to choose a style that suits their decor.

The Breckwell W3000 also prioritizes ease of use, featuring simple controls for adjusting the air supply and heat output. This ensures that even novice users can efficiently operate the stove and enjoy the benefits of wood heating. Overall, the Breckwell W3000 wood burning stove combines efficiency, aesthetics, and user-friendly features, making it a compelling choice for anyone looking to enhance their home’s heating system. With its blend of tradition and modern technology, the W3000 is designed not only to keep you warm but also to create a cozy ambiance in your living space.
Top Page Image Contents