Bretford lap18eulba manual Parts List, Tools Required, E-Unitrepositioning, Front To Rear, Step

LAP18EULBA

LAP18EULFR

NOTEBOOK CART ASSEMBLY

WITH TIMER

Assembly Instructions for:

INTERIOR E-UNITLAP18EULBA REPOSITIONING / REPLACEMENT

AND

TIMER REPLACEMENT

Parts List

Qty.	Part No.	Description
1	LAP18EULBA	Cart Assembly, e-units at back
	LAP18EULFR	Cart Assembly, e-units at front

NO TV/MONITOR TO BE USED ON TOP OF CART

Tools Required	MAXIMUM WEIGHT OF ACCESSORIES
Philips screwdriver	ON TOP OF CART: 25 LBS.

The socket-outlet to be installed near the equipment and to be easliy accessible.

Do not load each electrical unit with more than 12 A and do not load any recepticle with more than 12 A.

NOTE:

LAP18EULFR

UNPLUG CART (TIMER) POWER CORD FROM POWER

SOURCE BEFORE STARTING

E-UNIT REPOSITIONING:	CAUTION: RISK OF ELECTRICAL SHOCK.
	DO NOT PLUG INTO ANOTHER RELOCATABLE
'FRONT TO REAR'	POWER TAP.

SEE DETAIL 'B'

SEE DETAIL 'A' bottom shelf

Step 1

Open both front doors of cart to access E-Units. From underneath the bottom shelf, carefully unplug the power cords of the E-Units from the timer assembly (see Front View) and unclip the power cords from the side panel clips. Loosen the screw holding the E-Unit bracket assembly and remove all 4 bracket assemblies (see DETAILS 'A' and 'B').