OPERATING Your Breville Professional 800 Collection® VARIABLE TEMPERATURE KETTLE

OPERATING Your Breville Professional 800 Collection® VARIABLE TEMPERATURE KETTLE

Before first use

Remove and safely discard any packaging material or promotional labels attached to your kettle. It is recommended that before first use to fill the kettle to the maximum level with cold tap water, bring to the boil by selecting the BOIL 100° button, then discard the water. Your kettle will only operate when positioned on the power base. The kettle will automatically switch off when the water has reached the selected temperature.

Operation of your kettle

1.To fill the kettle, remove the kettle from the power base and open the lid by pressing the lid release button. Fill with the desired amount of water. Always fill the kettle between the minimum (500) and maximum (MAX 1800) marks on the water window. Too little water will result in the kettle switching off before the water has boiled or reached the selected temperature.

2.Ensure the lid is closed and locked firmly into place. Position the kettle securely onto the power base. Insert the power plug into a 230/240 power outlet and switch on. The START/CANCEL and 100° BOIL button surrounds will illuminate in white for one minute. A beep will sound for two seconds. The START/CANCEL button surround will automatically switch off after one minute if not selected.

NOTE: If the START/CANCEL button is pressed (before selecting a temperature button), the START /CANCEL button surround will illuminate in red and the 100º button surround will flash in white and the kettle will start heating.

3.Select the desired water temperature by pressing one of the five variable Celsius temperature buttons (80°, 85°, 90°, 95°, 100°). The selected button and the START/ CANCEL button surround will illuminate in white.

NOTE: The KEEP WARM function can be selected before, during or on completion of the water heating cycle (refer page 9).

4.Press the START/CANCEL button and the surround will illuminate in red, the selected temperature button surround will flash in white and the kettle will start heating. Do not remove the kettle from the power base during operation. Ensure the kettle has switched off after the water has boiled or the selected temperature has been reached before removing the kettle from the power base. If

the kettle is removed from the power base during the Keep Warm function the kettle will automatically switch off.

5.When the kettle has heated the water to the selected temperature, 3 beeps will sound, the START/CANCEL button surround illumination will switch off, and the selected temperature button surround will illuminate for 1 minute before switching off.

6.If the Keep Warm function has been selected, the Keep Warm button surround will remain illuminated in red, the selected temperature button surround will remain illuminated in white, and the kettle will continue to cycle on and off for 20 minutes.

7.If further heating of the kettle is not required, switch off at the power outlet, unplug the power cord and empty the water from the kettle. Replace the kettle onto the power base and close the lid.

NOTE: The default temperature setting of the kettle when switched on at the power outlet is 100°.

When the kettle is switched off at the power outlet and switched back on, it will automatically default to the 100° temperature setting.

When the kettle remains switched on at the power outlet and different temperature settings have been selected, the kettle will default to the last selected temperature setting.

WARNING: DO NOT OPEN THE LID DURING AND AFTER OPERATION. THIS MAY RESULT IN BOILING WATER SPLASHING FROM THE KETTLE. POUR ALL THE HOT WATER FROM THE KETTLE BEFORE OPENING THE LID TO REFILL.

NOTE: This kettle must be used only with the power base supplied. Use caution when pouring water from your kettle,

as boiling / heated water and steam will scald. Do not pour the water too quickly.

NOTE: Always fill the kettle to between the minimum (500) and maximum (MAX 1800) marks on the water window on the kettle. Too little water will result in the kettle switching off. Filling above the maximum mark on the water window of the kettle may result in boiling/heated water splashing from the kettle.

Safety boil dry protection

The kettle is fitted with a safety device, which protects against overheating should the appliance be operated with insufficient water. If this occurs the kettle will stop heating and a continuous tone will sound, indicating a dry boil error has occurred. The START/CANCEL and KEEP WARM button surrounds will also flash in red. Switch off at the power outlet and allow kettle to cool before refilling. The safety device will automatically reset when the kettle has cooled sufficiently.

For additional safety your kettle is fitted with an additional thermal cut out. In the event of severe overheating the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorised Breville Service Centre.

WARNING: THIS APPLIANCE IS DESIGNED FOR BOILING OR HEATING OF DRINKING QUALITY WATER ONLY. NEVER USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. NEVER INSERT TEA OR COFFEE INTO THE KETTLE. THE LID SHOULD ALWAYS BE LOCKED SECURELY INTO THE CLOSED POSITION BEFORE USE.

13

BKE820_KETTLE_FA.indd 13-14

14

3/6/08 11:34:39 AM

Page 7
Image 7
Breville BKE820 brochure Before first use, Operation of your kettle, Safety boil dry protection