ASSEMBLY & OPERATION
Before first use
Remove any packaging material and promotional labels. Remove the blending leg from the mixer motor body and wash it in warm soapy water (refer to assembly instructions in this booklet). Rinse and dry thoroughly. Ensure no water remains inside the blending leg to avoid water running into the motor body when reattached.
Disassemble and wash the chopping blade, chopper bowl, chopper bowl lid, storage lid, and blending jug in warm soapy water, rinse and dry thoroughly. Ensure no water remains on the chopper bowl lid to avoid water running into the motor body when reattached.
NOTE
The detachable blending leg, chopping bowl, chopping blade, blending jug, and dual purpose storage lid/anti- slip mat can also be washed in the dishwasher. The chopper bowl lid, and motor body are not dishwasher safe
–see the care and cleaning section of this booklet for cleaning instructions of these parts.
This stick mixer is a versatile appliance that can be attached to:
•The blending leg– for use as a stick mixer
•The chopper bowl with chopping blade and lid – for use as a mini chopper
To attach the blending leg
Hold the blending leg with the blades down, and align the top end of the blending leg with the corresponding end of the motor body and push until the blending leg ‘clicks’ and locks onto the motor body.
Always ensure blending leg is dry, and no water left inside, before reattaching.
Using as a stick mixer
Ensure the blending leg is assembled to the motor body as detailed above.
1.Place food to be processed into the blending jug provided (or a sufficiently large mixing bowl or saucepan). The jug provided should be only be ½ full or less when blending liquids or when making a puree of fruit and/or vegetables.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.By turning the dial at the top of motor body, select a speed between low and high.
NOTE
If selecting a high speed, it is recommended that you start with a slow speed and gradually increase to the higher speed to avoid splattering and
4.Place the blending leg as deeply as possible into the jug and press the trigger switch to turn the stick mixer on. The button must be held for the required duration of operation.
9
