Breville BTM800 manual Cleaning the Glass Jug, Cleaning the Jug Lid and integrated scale filter

Ensure the Tea Maker is turned OFF by pressing the TEACancel button (when brewing tea) or the HOT WATERCancel button (when heating water) on the Power Base. The Tea Maker is OFF when the button surround illumination goes out. Remove the power plug from the wall outlet.

NOTE:

Allow all parts of theTea Maker to cool completely before disassembling and cleaning.

NOTE:

Only the Jug Lid,Tea Basket,Tea Basket Lid andTea Scoop are dishwasher safe.

!Never immersethe BASE OFTHE GLASS JUG, POWER Base, power cord or power plug in water or allow moistureto come in contact withthese parts.

2.Alternatively, the Jug Lid is dishwasher safe. Position the Jug Lid vertically so the scale filter is facing upwards. This will allow water to drain properly.

3.Let all surfaces dry thoroughly prior to using.

Cleaning the Glass Jug

1.After each use, empty the Glass Jug. Do not allow brewed tea to stand overnight.

2.Wipe the interior of the Glass Jug with a soft damp sponge or rinse with warm water. Tea deposits will enhance the flavour of the brewed tea, so if only using as a Tea Maker do not wash with soapy water.

3.Wipe the exterior of the Glass Jug with a soft damp cloth to clean.

!NEVER IMMERSE OR WASH EXTERIOR OF GLASS JUG UNDER RUNNING WATER.

Cleaning the Jug Lid and integrated scale filter

1.Wash the Jug Lid in warm soapy water with a soft sponge, rinse and dry thoroughly. The integrated scale filter can be cleaned by placing under running hot water and rubbing with a cleaning cloth or brush.

NOTE:

Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the Glass Jug as these may scratch the surface.

29