BEFORE FIRST USE
of your Breville
the Original™
Before first use
Check that the cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth. Place the toastie maker on a flat, level surface with the lid in the closed position.
1.Insert the power plug into a 230/240v power point and turn the power on. The red power ‘ON’ light will illuminate.
2.Allow toastie maker to preheat (with the lid closed) until the green ‘READY’ light illuminates.
3.During this time, prepare the toasties by buttering up to four slices of bread and preparing filling.
4.Place up to two slices of bread
(up to 4 slices BTS400 only) on the plates,buttered sides down. Place filling on top of bread.
5.Place remaining bread on filling, buttered side up.
6.Carefully close the lid and clip handles together. Do not force the lid to close.
WARNING
Steam will be ejected from between the cooking plates when the lid is closed. Be careful not to make contact with the steam as it may cause burns.
7.Toasting should take approximately three minutes. Exact toasting time will be a matter of taste. It will also depend on the type of bread and type of filling used.
NOTE
The green ‘READY’ light will cycle on and off during the toasting process indicating that the correct temperature is being maintained.
8.When the toastie is cooked, remove it with the help of a plastic or wooden spatula. Never use metal tongs or a knife as these can cause damage to the non- stick coating.
9.To maintain heat, keep the lid closed until you are ready to toast the next sandwich.
NOTE
At all times the lid must be closed when cooking.
NOTE
When using the toastie maker for the first time you may notice a fine smoke haze. This is caused by the heating of some of the components. There is no need for concern.
IMPORTANT
Fully unwind power cord from cord storage facility before use.
9