Operating your breville gourmet single cup brewer™

Operating your breville gourmet single cup brewer™

NOTE:

The My K-Cup®accessory is designed for ground coffee only. Do not:

a)Use a K-Cup®or coffee pod in the My K-Cup®Filter Basket.

b)Use the My K-Cup®Filter Basket with the K-Cup®Holder After brewing with the My K-Cup®accessory, the K-Cup®Holder must be inserted into the Brewing Chamber in order to brew a K-Cup®.

To replace the K-Cup®Holder, raise the Safety Locking Arm, and remove the My K-Cup®Holder. Insert K-Cup®Holder into the Brewing Chamber, aligning the arrow on the K-Cup®Holder with the arrow in the Brewing Chamber. Use caution when doing this as there

is a sharp needle on the underside of the Brewing Chamber Head that punctures the K-Cup®.

SROPPING THE BREW PROCESS

To stop brewing after the process has started, press and release the Power Switch on the right side of the Brewer to the ‘OFF’ status. The flow of coffee, tea or hot cocoa will stop, the heating element will shut off and the LED’s illuminating the Water Tank will no longer be lit. The LCD screen will indicate the time, ‘ON-OFF TIME’ and ‘AUTO OFF’. None of the control panel buttons will be active until the Brewer is turned back on.

NOTE:

You may get less coffee, tea or hot cocoa during your next brew. After a terminated brew, we recommend that you follow the instructions for Brewing hot water (page 18). Your next brew will then dispense the correct volume according to the brew size you have selected.

Brewing hot water

The Brewer is able to dispense a cup of hot water for making hot chocolate in a packet, for use in cooking, for making soups, etc.

Follow the instructions Brewing a K-Cup® (page 12), without inserting a K-Cup®.

NOTE:

After brewing a hot cocoa K-Cup®, or stopping the brew process mid-cycle, we recommend running a hot water brew cycle.

Refilling the water tank

The LCD screen will indicate ‘REFILL TANK’ when the water level in the Water Tank is low or if the Water Tank has been removed.

1.Fill the Water Tank with water up to the 'MAX' mark on the viewing window. The Water Tank can be filled in two ways:

a)Remove the Water Tank Lid and pour water directly into the Water Tank while it is still attached to the Brewer, then replace the Lid.

b)Remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Fill with water. Place the Water Tank back onto the Brewer and replace the Lid.

2.The LCD screen will indicate either:

a)‘OPEN HEAD’. Raise and lower the Safety Locking Arm completely.

b)‘HEATING’ as the Brewer heats the water for the next brew cycle. This process lasts about 15 seconds. The pump will make a vibrating sound. This is normal.

3.Once the Safety Locking Arm is opened and lowered, or the water is heated, the LCD screen will indicate ‘READY TO BREW’, indicating the brew cycle

can begin. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

Do not remove the Water Tank during the brewing process.

Purging the brewer

If the Brewer has not been used for more than one week, you should renew the water from the inner tank by purging the brewer.

1.If there is water in the Water Tank, remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Discard the water, rinse and refill with bottled or filtered water. Place the Water Tank back onto the Brewer and replace the Lid.

2.If there is no water in the Water Tank, refill with water. Place the Water Tank back onto the Brewer and replace the Lid.

3.Ensure the Brewer is turned on. Raise and lower the Safety Locking Arm on the Brewer without inserting a K-Cup®.

4.The LCD screen will indicate ‘READY TO BREW’ and the ‘BREW’ button will illuminate and flash.

5.The LCD screen will indicate the default brew size (7.25 oz. serving unless programmed otherwise). Select the largest brew size (11.25 oz. serving) by pressing the button on the control panel.

6.Place a 12 oz. mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

7.Press the ‘BREW’ button. Hot water will flow into your mug. When the flow stops, discard the hot water.

8.Repeat this process 2 more times to completely renew the water from inner tank.

18

 

 

 

 

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 9 Page 11
Page 10
Image 10
Breville XXBKC600XL manual Brewing hot water, Refilling the water tank, Purging the brewer, LCD screen will indicate either
Page 9 Page 11

XXBKC600XL, BKC700XL specifications

The Breville BKC700XL and BKC600XL are innovative single-serve coffee machines that cater to the needs of coffee enthusiasts. Known for their versatility and ease of use, these models bring the café experience right into your kitchen.

The BKC700XL, also referred to as the Breville Gourmet Single-Serve Coffee Maker, stands out for its ability to brew a variety of coffee styles. It features a wide range of brew sizes, allowing users to choose from standard 8, 10, or 12-ounce cups. The machine is compatible with both ground coffee and K-Cups, providing the flexibility to use your preferred coffee source.

One of the most notable technologies in the BKC700XL is its innovative brew system. This system uses precise water temperature control, ensuring that the coffee is brewed at the optimal temperature for maximum flavor extraction. Additionally, the machine includes a powerful pump that generates the ideal pressure for a rich crema, mimicking the quality of a traditional espresso machine.

The BKC600XL model, while slightly less advanced than the BKC700XL, still boasts impressive features that make it a strong contender in the single-serve market. Its intuitive interface allows users to brew coffee with just the touch of a button. The BKC600XL is also designed with a unique cup size selector, giving users the option to customize their coffee experience.

Both models prioritize convenience, featuring removable water reservoirs for easy refilling and cleaning. They also come equipped with an automatic shut-off feature, making them safe and energy-efficient. The machines are built with a sleek and compact design, ensuring that they fit easily on any countertop without taking up much space.

Breville's commitment to quality is apparent in the materials used, with a brushed stainless steel exterior that not only looks elegant but also ensures durability. The BKC700XL and BKC600XL are not just coffee makers; they are an experience. With advanced brewing technologies and user-friendly features, these machines allow coffee lovers to explore a wide range of flavors and styles from the comfort of their home.

In summary, the Breville BKC700XL and BKC600XL offer exceptional brewing capabilities, stylish designs, and user-friendly interfaces, making them ideal choices for both casual drinkers and coffee aficionados alike. Whether you prefer the versatility of the BKC700XL or the simplicity of the BKC600XL, both machines promise a delightful coffee experience.
Top Page Image Contents