3400 PSI Pressure Washer
11
How to Use Spray Tips
The nozzle extension quick–connect allows the use of
several different spray tips.Each spray tip provides a
different spray pattern (Figure 8).
Follow these instructions to change spray tips:
1. Engage safety latch on spray gun.
2. Pull back collar on quick–connect and pull current
spray tip off.
3. Select desired spray tip:
• For gentle rinse, select white 40° or green 25°
spray tip.
• To scour surface,select yellow 15° or red 0° spray
tip.
• To apply chemical,select black spray tip.
4. Pull back on collar,inser t new spray tip and release collar.
Tug on spray tip to make sure it is securely in place.
5. For most effective cleaning,keep spray tip from 8 to 24
inches away from cleaning surface.
6. DO NOT get closer than 6 inches when cleaning
automobile tires.
Cleaning and Applying Chemical
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump.
To apply detergent follow these steps:
1. Review spray tip use.
2. Prepare detergent solution as required by
manufacturer.
3. Place chemical injection siphon/filter into detergent
container.
4. Make sure black spray tip is installed.
NOTE: Detergent cannot be applied with high pressure
spray tips (White,Green, Yellow,or Red).
White
40°
Green
25°
Black Yellow
15°
Red
0°
Low Pressure High Pressure
Figure 8 — Spray Tips
Use to
apply
chemical
• NEVER exchange spray tips without locking the safety latch
on the trigger.
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
CAUTION CAUTION
• Starting the engine without all the hoses connected and
without the water turned ON will damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
You must attach all hoses before you start the engine.
CAUTION
• When inserting the filter into a detergent solution bottle,
route the tube so as to keep it from inadvertently contacting
the hot muffler.
Keep the chemical injection tube from coming in contact
with the hot muffler.