Using the remote control
5 Manual clean mode & Direction control
Move forward | Select to move forward |
Turn left | Select to turn left |
Turn right
Select to turn right
✻✻Moving backward is not available.
6 Point cleaning
Available only with C, D type remote controllers.
You can use the remote control to point and clean the desired spot while the POWERbot is in cleaning process.
Point the red light on the floor within 0.5 m around POWERbot's location.
Press and hold the Point cleaning button to move the red light to the desired spot. The POWERbot will follow the light while cleaning.
0.5 m
Operating distance of the remote control
Height of the | 0.5 m | 1 m | 1.5 m | |
remote control | ||||
|
|
| ||
Operating | About 1.5 m | About 2 m | About 3 m | |
distance | ||||
|
|
|
Height of the remote control
Operating distance
Inserting batteries
Open the battery cover by lifting it up while pressing the locking tab and insert the batteries as shown in the illustration. Then, close the cover until it clicks into place.