SpeedClean™ 2000 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush chemical injection hose by placing filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in forward position). Flush for one to two minutes.

2.Shut off engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty pump of all pumped liquids by pulling recoil handle about 6 times.This should remove most liquid in pump.

4.Use PumpSaver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: PumpSaver will drip from pump after treatment and will stain wood and concrete.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

14

Page 13 Page 15
Page 14
Image 14
Briggs & Stratton 020211-0 owner manual Preparing the Unit for Storage, Storing the Engine, Protecting the Pump
Page 13 Page 15

020211-0 specifications

Briggs & Stratton is a renowned name in the world of small engine manufacturing, and one of their standout products is the Briggs & Stratton 020211-0 generator. This generator is designed to provide reliable backup power for homeowners, ensuring that essential appliances and devices remain operational during power outages.

The Briggs & Stratton 020211-0 features a robust engine that delivers consistent performance. It is equipped with a powerful 306cc OHV engine that efficiently converts fuel into energy, ensuring a steady output. This model is particularly known for its durability and long runtime capabilities, making it ideal for both emergency situations and recreational use.

One of the hallmark features of the 020211-0 is its portable design. It is lightweight yet sturdy, allowing users to easily transport the generator wherever needed. The generator also comes with built-in wheels and a handle, making mobility effortless. This portability makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where access to power is required.

In terms of power output, the 020211-0 has a running wattage of 5000 and a peak wattage of 6250, providing ample energy to run household appliances such as refrigerators, air conditioning units, and power tools. This capability is especially important during severe weather, when electrical outages are most common.

Safety is a major consideration in the design of the Briggs & Stratton 020211-0. The generator is equipped with a Low Oil Shutdown feature, which helps prevent engine damage by automatically shutting off the engine when oil levels drop too low. Additionally, the generator has a circuit breaker for added protection against overloads.

Another significant characteristic of the 020211-0 is its ease of operation. The electric start feature allows users to start the generator quickly and conveniently, eliminating the hassles of recoil starters. This user-friendly approach ensures that even those new to generators can operate it with confidence.

In summary, the Briggs & Stratton 020211-0 generator combines powerful performance, portability, safety features, and ease of use. Whether you need backup power for emergencies or additional power for recreational activities, this generator proves to be a reliable choice that meets diverse power needs. Its blend of technology and durability makes it a top contender in the generator market, a testament to Briggs & Stratton's commitment to quality and innovation.
Top Page Image Contents