SpeedClean™ 2000 PSI Pressure Washer
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
High Pressure Hose
Spray Gun
Air Cleaner
Primer Bulb
Recoil Starter 
Fuel Tank
High Pressure Outlet
& Water Inlet
Chemical Injection
Siphon/Filter
Air Cleaner — Dry type filter element limits the amount of dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water through pump when water reaches
water will discharge from pump onto ground.This system prevents internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.
Fuel Tank — Fill tank with regular unleaded fuel.
High Pressure Hose — Connect one end to water pump and the other end to spray gun.
Pump equipped with
Automatic Cool Down System
High Pressure Outlet — Connection for high pressure hose.
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer. Please have these readily available if calling for assistance.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
Recoil Starter — Used for starting the engine manually. Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.
Water Inlet — Connection for garden hose.
5
