SpeedClean™ 2200 PSI Pressure Washer

9.When starting engine, position yourself as recommended in Figure 12 and start engine according to instructions given in engine operator’s manual.Also see operating instructions tag located on the pressure washer.

Figure 12 - Recommended Starting Position

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•ALWAYS point gun in safe direction and squeeze spray gun trigger, to release pressure and avoid kickback each time, before starting engine.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point gun in safe direction and squeeze spray gun trigger to release high pressure.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when gun kicks back.

NOTE: Always keep the throttle lever in the “Fast” position when operating the pressure washer.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 ft. (152 cm) clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

How to Stop Your Pressure Washer

1.Let engine idle for two minutes.

2.Turn engine off according to instructions given in engine operator’s manual.

3.ALWAYS point gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

WARNING

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•ALWAYS point gun in safe direction and squeeze spray gun trigger, to release high pressure, every time you stop engine. Engage trigger lock when not in use.

4.Engage trigger lock on spray gun when not in use.

11

Page 10 Page 12
Page 11
Image 11
Briggs & Stratton 020261-0 manual How to Stop Your Pressure Washer, Recommended Starting Position
Page 10 Page 12

020261-0 specifications

The Briggs & Stratton 020261-0 is a powerful portable generator designed to provide reliable and efficient backup power during emergencies or for outdoor activities. With a robust build and advanced technologies, this generator stands out in the market for its performance and user-friendly features.

One of the main features of the Briggs & Stratton 020261-0 is its 3000 running watts and 3750 starting watts capability. This capacity makes it suitable for powering essential appliances such as refrigerators, lights, and HVAC systems during outages, along with recreational uses like camping and tailgating. The generator is equipped with a 127cc engine that delivers efficient fuel consumption, allowing it to run for extended periods on a single tank. Its fuel tank has a capacity of 1.5 gallons, supporting a runtime of up to 9 hours at a 25% load.

In terms of technology, the Briggs & Stratton 020261-0 features a reliable recoil start system, which is both simple and effective. It is designed for easy portability, thanks to its lightweight construction and integrated handle. The generator also has a built-in circuit breaker to help protect the generator and connected devices from overload, enhancing safety during operation.

Another notable characteristic of the 020261-0 is its low noise operation. The generator is engineered for quieter functioning, making it ideal for use in residential areas or campgrounds where noise regulations may apply. Additionally, it has multiple outlets, including two household outlets and one 12V DC outlet for charging batteries, providing flexibility in powering various devices simultaneously.

Maintenance is made straightforward with the Briggs & Stratton 020261-0, as it boasts an easily accessible oil drain and a durable frame that can withstand rugged use. The generator's design prioritizes user convenience, ensuring that both setup and transport are hassle-free.

Overall, the Briggs & Stratton 020261-0 combines power, efficiency, and portability, making it an excellent choice for those in need of reliable backup power. With its solid performance, advanced safety features, and ease of use, it caters to the demands of both homeowners and outdoor enthusiasts alike, ensuring peace of mind when power outages occur or when venturing away from a traditional power source.
Top Page Image Contents