How to Use ProjectPro® Nozzle System

The quick–connect on the nozzle extension allows you to switch between four different ProjectPro® system nozzles. ProjectPro® nozzles can be changed while pressure washer is running once spray gun trigger lock is engaged. The ProjectPro® nozzles vary the pressure and spray pattern as shown.

Low Pressure

Black

Use to apply

detergent

High Pressure

Delicate

 

General

 

Max

40° Yellow

 

15° Orange

 

0° Red

1750 PSI

 

2200 PSI

 

2550 PSI

2.3 GPM

 

2.2 GPM

 

2.0 GPM

Follow these instructions to change ProjectPro® nozzles:

1. Engage trigger lock on spray gun.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER exchange nozzles without locking the trigger lock on the spray gun.

•DO NOT twist nozzles while spraying.

2.Pull back collar on quick–connect and pull current ProjectPro® nozzles off. Store ProjectPro® nozzles in holder provided on the accessory tray.

3.Select desired ProjectPro® nozzle:

•For delicate rinse (lower pressure and higher flow), for gentle cleaning of cars/trucks, boats, RV’s, patio furniture, lawn equipment, etc., select yellow Delicate ProjectPro® nozzle.

•For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange General ProjectPro® nozzle.

•For maximum rinsing (higher pressure and lower flow), for stubborn or hard to reach surface such as second story surfaces, paint removal, oil stains, rust removal or other stubborn substances (tar, gum, grease, wax, etc.), select red Max ProjectPro® nozzle.

15