Briggs & Stratton 020364-0 manual Low Pressure, How to Use Accessory Tray, High Pressure

How to Use Accessory Tray

The unit is equipped with an accessory tray with places to store your Project Pro® nozzles.

NOTE: The extra hole in the tray is for storing a utility brush. The extra clip in the tray is for storing a turbo nozzle. The brush and turbo nozzle are NOT included with your pressure washer. You can buy these items as optional accessories.

1.Place spray gun and nozzle extension into spray gun holder wireform, as shown.

2.Coil high pressure hose onto hose reel.

3.Insert multi–colored Project Pro® nozzles in spaces provided in accessory tray.

How to Use Project Pro® Nozzles

The quick–connect on the nozzle extension allows you to switch between four different Project Pro® nozzles. Project Pro® nozzles can be changed while pressure washer is running once spray gun trigger lock is engaged. The Project Pro® nozzles vary the pressure and spray pattern as shown.

	Low Pressure
	Black
	Use to apply
	detergent
	High Pressure
Delicate	General	Max
40° Yellow	15° Orange	0° Red
2650 PSI	3000 PSI	3400 PSI
2.8 GPM	2.7 GPM	2.4 GPM

Follow these instructions to change Project Pro® nozzles:

1. Engage trigger lock on spray gun.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER exchange nozzles without locking the trigger lock on the spray gun.

•DO NOT twist nozzles while spraying.

2.Pull back collar on quick–connect and pull current Project Pro® nozzles off. Store Project Pro® nozzles in holder provided on the accessory tray.

16 BRIGGSandSTRATTON.COM