3. Select desired Project Pro® nozzle: |
| • For applying detergent, applies project specific |
• For delicate rinse (lower pressure and higher flow), |
| cleaners to help break down stubborn dirt and |
for gentle cleaning of cars/trucks, boats, RV’s, patio |
| grime on a variety of surfaces, select black Project |
furniture, lawn equipment, etc., select yellow |
| Pro® cleaning detergent nozzle. |
Delicate Project Pro® nozzle. |
|
|
|
| |
|
|
|
|
|
|
|
|
|
•For general rinsing (medium pressure and medium flow), ideal for most all purpose cleaning such as home siding, brick patios, wood decks, driveways and sidewalks, garage floors, etc., select orange General Project Pro® nozzle.
•For maximum rinsing (higher pressure and lower flow), for stubborn or hard to reach surface such as second story surfaces, paint removal, oil stains, rust removal or other stubborn substances (tar, gum, grease, wax, etc.), select red Max Project Pro® nozzle.
4.Pull back on collar, insert new Project Pro® nozzle and release collar. Tug on Project Pro® nozzle to make sure it is securely in place.
Usage Tips
•For most effective cleaning, keep nozzle from 8 to
24 inches (20 to 61 cm) away from cleaning surface.
•If you get nozzle too close, especially using a high pressure nozzle, you may damage surface being cleaned.
•DO NOT get closer than 6 inches (15 cm) when cleaning tires.
Cleaning and Applying Detergent
CAUTION
Chemicals can cause bodily injury, and/or property damage.
•NEVER use caustic liquid with pressure washer.
•Use ONLY pressure washer safe detergents/soaps. Follow all manufacturers instructions.
To apply detergent, follow these steps:
1.Review use of Project Pro® nozzles.
2.Prepare detergent solution as required by job.
3.Place small filter end of detergent siphoning tube into detergent container.
NOTICE
Contact with the hot muffler can damage detergent siphoning tube.
•When inserting the filter into a detergent solution bottle, route the tube so as to keep it from inadvertently contacting the hot muffler.
NOTE: Make sure the filter is fully submerged in detergent while applying detergent.
4. Make sure black detergent nozzle is installed.
NOTE: Detergent cannot be applied with the high pressure Project Pro® nozzle (Orange, Yellow or Red).
17
