Oil Recommendations

MAINTENANCE

•Use low pressure air (not to exceed 25 psi) to blow away dirt. Inspect cooling air slots and opening on water pump. These openings must be kept clean and unobstructed.

Remove silt and sludge buildup in pump body:

•Open priming plug and remove drain plug.

•Flush internal components of pump with clean water.

Oil

NOTE: When adding oil to the engine crankcase, use only high quality detergent oil rated with API service classification SF, SG, SH, SJ or higher. DO NOT use special additives.

1.Choose a viscosity according to the table below:

			5W-30, 10W-30
			Synthetic 5W-30, 10W-30

°F	-20	0	20	32 40			60	80	100
°C	-30	-20	-10		0	10	20	30	40

STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

*The use of multi-viscosity oils (5W-30, 10W-30, etc.) in temperatures above 40°F (4°C) will result in higher than normal oil consumption.When using a multi-viscosity oil, check oil more frequently.

**The use of SAE 30 oil in temperatures below 40°F (4°C) will result in hard starting and possible engine bore damage due to inadequate lubrication.

NOTE: Synthetic oil meeting ILSAC GF-2,API certification mark and API service symbol with “SJ/CF ENERGY CONSERVING” or higher, is an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

Checking Oil Level

Oil level should be checked prior to each use or at least every 8 hours of operation. Keep oil level maintained.

1.Make sure unit is on a level surface.

2.Remove oil fill cap and wipe clean with cloth.

3.Verify oil is at the point of overflowing at oil fill opening.

Adding Engine Oil

1.Make sure unit is on a level surface.

2.Check oil level as described in “Checking Oil Level”.

3.If needed, slowly pour oil into oil fill opening to the point of overflowing at oil fill cap.

Changing Engine Oil

Change the oil after the first 5 hours of operation. Change oil every 50 hours thereafter. If you are using your water pump under extremely dirty or dusty conditions, or in extremely hot weather, change the oil more often.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

Change the oil while the engine is still warm from running, as follows:

1.Make sure unit is on a level surface.

2.Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR WATER PUMP

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

073004 WP15-225 specifications

The Briggs & Stratton 073004 WP15-225 is a powerful and efficient water pump designed to tackle a variety of dewatering tasks. Engineered with durability and performance in mind, this pump is ideal for homeowners, contractors, and outdoor enthusiasts looking for a reliable solution for managing water removal from puddles, flooded basements, or construction sites.

At the heart of the WP15-225 is a robust 225cc Briggs & Stratton engine that generates ample power to move large volumes of water quickly. With a pumping capacity of up to 3,000 gallons per hour, it can handle substantial dewatering projects with ease. The engine is designed for easy starting, thanks to the reliable recoil start system, ensuring that users can get to work without delays.

One of the standout features of the WP15-225 is its cast iron volute and impeller, which provide superior durability and resistance to corrosion. This construction not only extends the lifespan of the pump but also enhances its efficiency during operation. The pump is capable of lifting water from depths of up to 25 feet, making it an effective solution for a range of applications.

The WP15-225 also includes a user-friendly design with ergonomic handles for easy transportation, coupled with a lightweight frame that makes it convenient to move around job sites. The integrated transport kit allows users to maneuver the pump effortlessly, delivering convenience on the go.

Furthermore, the pump features a durable, large-capacity fuel tank that ensures extended operation between refueling, minimizing downtime for the user. Its adjustable discharge feature allows for versatile operation, accommodating different discharge hose sizes and lengths, which is particularly useful for varying project requirements.

Safety features are not overlooked; the pump includes a low-oil shutdown mechanism that protects the engine from damage, ensuring longevity and reliable performance. The design has been tailored to minimize vibration, resulting in reduced user fatigue during extended use.

In summary, the Briggs & Stratton 073004 WP15-225 is a reliable, high-performing water pump that combines powerful engineering with user-friendly features. With its robust construction, efficient pumping capability, and thoughtful design elements, it stands out as a top choice for anyone in need of an effective solution for water management tasks. Whether it's for residential or commercial use, the WP15-225 is built to meet the demands of any dewatering challenge.

Briggs & Stratton 073004 WP15-225 Oil Recommendations, Checking Oil Level, Adding Engine Oil

Models: 073004 WP15-225

Oil