Briggs & Stratton 1687079 Installation Instructions, REMOVAL 54” FRAME HUNG, Roller Bar Mower Kit

Installation Instructions			Roller Bar Mower Kit
C	F	G
		H
	D
B		Q
	E		S	A
A				O
	M
	I		R
		L		Q
		J	M
		N
		A
				P

Figure 2. Remove Frame Hung	F. Height of Cut Plate		M. Stop, Height of Cut
Components	G. Lockwashers, 5/16		N. Adjustment Rods
A. Capscrew, 5/16-18 x 3/4	H. Nuts, 5/16-18		O. Straps
B. Bracket & Wheel Assembly, RH	I.	Hair Pins	P. Bracket & Wheel Assembly, LH
C. Trunnion Assembly	J.	Clevis Pins	Q. Locknuts, & Washers
D. Capscrews, 5/16-18 x 1-1/4	K.	Rocker Shaft Assembly	R. Capscrews, 5/16-18 x 1-1/2
E. Arm	L.	Locknut, 1/2-13	S. Chains, 4 Link

REMOVAL 54” FRAME HUNG

1.Disconnect hair pins (I, Figure 2) and clevis pins (J) from adjustment rods (N). Remove adjustment rods

(N) from rocker arm assembly (M). Reconnect hair pins (I) and clevis pins (J) into adjustment rods (N) to prevent loss.

2.Remove and retain 5/16-18 x 1-1/4 capscrews (A). Remove and bracket (B).

3.Remove and retain 5/16-18 x 1-1/4 capscrews (D), arm (E) and crank & trunnion assembly (C). Remove and retain nuts (H), lockwashers (G) and height of cut plate (F).

4.Remove and retain nuts (L). Remove and discard stop (M).

5.Remove and retain straps (O) capscrews (A). Remove and discard rocker arm assembly (K).

6.Remove and retain 5/16-18 x 1-1/2 capscrews (R) locknuts & washers (Q), and chains (S).

2