Manitowoc Ice QC0700, QF2300, QF0800, QF0400, QF2200 Installation Instructions, Section, 2-10

Installation Instructions Section 2

WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONS

!Caution

Plumbing must conform to state and local codes.

Location	Water Temperature	Water Pressure	Ice Machine Fitting	Tubing Size Up to Ice
				Machine Fitting
Ice Making	45°F (6°C) Min.	20 psi (137.9 kPA) Min.	3/8" Female	3/8" (9.5 mm) minimum
Water Inlet	90°F (32.2°C) Max.	80 psi (551.5 kPA) Max.	Pipe Thread	inside diameter
Condenser	33°F (0.6°C) Min.	20 psi (137.9 kPA) Min.	1/2" Female	1/2" (12.7 mm) minimum
Water Inlet	90°F (32.2°C) Max.	150 psi (1034.2 kPA) Max.	Pipe Thread	inside diameter
Condenser	---	---	1/2" Female	1/2" (12.7 mm) minimum
Water Drain			Pipe Thread	inside diameter
Bin Drain	---	---	1/2" Female	1/2" (12.7 mm) minimum
			Pipe Thread	inside diameter

VENT TUBE 8” (20CM)

LONG

ICE MAKING

WATER INLET

TUBING 3/8” MIN.

I.D. (.95 SM)

BIN DRAIN

SV2115

WATER

SHUT-OFF

VALVE

SV1626

Typical Water Supply Drain Installation

2-10 Revised 8/2003 Part No. 80-1214-3