Ice Machine Operation | Section 3 |
|
|
PROCEDURE TO CLEAN HEAVILY SCALED FLAKE/CHIPLET ICE MACHINES QF400/QC700/QF800/QF2300
Step 1 Remove front and top covers, set the toggle switch to the OFF position.Remove all ice from the bin.
Step 2 Remove front and top covers and set the toggle switch to the OFF position.
Step 3 Disconnect water supply line at float valve quick disconnect by depressing stainless steel lever.
Step 4 Refer to chart below:
Premix cleaner with lukewarm water in a non- metallic container.
|
| Mix Cleaner and Water | ||
| Water | Use Ice machine cleaner | ||
| part number 000000084 | |||
Model | Reservoir | |||
| Capacity | only | ||
|
|
|
| |
|
| Cleaner | Water | |
|
|
|
| |
QF400 | 48 oz (1.4 L) | 32 oz (0.94 L) | 16 oz (0.5 L) | |
|
|
|
| |
QF800/ | 48 oz (1.4 L) | 32 oz (0.94 L) | 16 oz (0.5 L) | |
QC700 | ||||
|
|
| ||
|
|
|
| |
QF2300 | 72 oz (2.1 L) | 48 oz (1.4 L) | 24 oz (0.7 L) | |
|
|
|
| |
Step 5 Remove all water from the evaporator and water reservoir. Start an ice making cycle by moving the toggle switch to the ICE position. Water will flow through the water dump valve and down the drain for 45 seconds. After 45 seconds move the toggle switch to the OFF position. Remove the plug from the top cover of the water reservoir. Add the entire cleaner/water solution and
Leave the cleaner/water solution in the evaporator for a minimum of 4 hours.
Step 6 Move the toggle switch from OFF to ICE. The cleaner/water solution will flow through the water dump valve and down the drain for 45 seconds.
Step 7 Move the toggle switch to the OFF position, then follow the standard cleaning and sanitizing procedures for the model ice machine you are cleaning.
| Part Number |
