Section 4: Operation
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to store your spray gun, nozzle extension and quick connect spray tips.There is also a hook at the front of the accessory tray to hold your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility brush.The extra clip in the tray is for storing a turbo nozzle.The brush and turbo nozzle are NOT included with your pressure washer.You can buy these items as optional accessories.
1.Place nozzle extension through hole on accessory tray, as shown in Figure 13.
Figure 13 — Typical Accessory Tray
2.Place spray gun through hole on accessory tray on right side of unit (Figure 13).
NOTE: You may also use the hooks attached to the base and handle to store your gun and nozzle extension, as shown on page 6.
3.Insert
4.Hang high pressure hose on hook attached to accessory tray on front of tray, as shown in Figure 13.
How to Use Quick Connect Spray Tips
The
Figure 14 — Spray Tip Spray Patterns
Low Pressure
Black
Use to apply
detergent
High Pressure
40° White |
| 15° Yellow |
| 0° Red |
1650 PSI |
| 1950 PSI |
| 2200 PSI |
2.2 GPM |
| 2.1 GPM |
| 1.9 GPM |
Follow these instructions to change spray tips:
1.Engage trigger lock on spray gun.
CAUTION
A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.
•NEVER exchange spray tips without locking the trigger lock on the spray gun.
•DO NOT twist spray tips while spraying.
12
