Briggs & Stratton 30205 manual Troubleshooting, Problem, Cause, Correction, generator is running

TROUBLESHOOTING

TROUBLESHOOTING

Problem	Cause		Correction
	1.	One of the circuit breakers is	1.	Reset circuit breaker.
		open.
No AC output is available, but	2.	Fault in generator.	2.	Contact Authorized service facility.
	3.	Poor connection or defective cord	3.	Check and repair.
generator is running.
		set.
	4.	Connected device is bad.	4.	Connect another device that is in
				good condition.
Generator runs good at no-load	1.	Short circuit in a connected load.	1.	Disconnect shorted electrical load.
but "bogs" down" when loads are	2.	Generator is overloaded.	2.	See "Don't Overload Generator".
connected.	3.	Shorted generator circuit.	3.	Contact Authorized service facility.
	1.	Discharged battery.	1.	Manually start generator and/or
Generator will not start; or starts				charge battery.
	2.	Failed battery.	2.	Replace battery.
and runs rough.
	3.	Low oil level.	3.	Fill crankcase to proper level or
				place generator on level surface.
Generator shuts down during	Out of gasoline.		Fill fuel tank.
operation.
Generator lacks power.	Load is too high.		See "Don't Overload Generator".

15