14. Locate carburetor.
16. Remove existing jet from lower carburetor inlet.
15. Loosen hose clamp with a flat head screwdriver or a 5/16 | 17. | Install new jet. | |
18. | Replace hose and secure with hose clamp to carburetor. | ||
socket wrench to remove hose from jet. | |||
| 19. | Replace muffler cover and back exhaust panel. | |
| 20. | Replace both side panels. | |
| 21. | Replace divider and roof. | |
| 22. | Reinstall 15 Amp fuse in control panel. | |
| 23. | Set control panel system switch to ON. | |
| 24. | Set generator circuit breaker to ON position. | |
| 25. | Close control panel door and insert key into lock and turn | |
|
| key one quarter turn clockwise. Remove key. | |
| The system is now ready to operate using LPG fuel. | ||
NOT REPRODUCTION
FOR
313575 Rev B