General Operating Instructions

Before Operation

Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades.

Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.

For efficient bagging, air circulation under the mower deck, through the chute and into the bag is very important.

For this reason, BEFORE YOU BEGIN MOWING you should make certain the underside of the mower and the underside of the catcher lid are free from grass and debris.

Make sure that there is a snug fit between mower deck, blower housing, tubes, and grass catcher cover.

Mowing with the Catcher

Always operate with throttle at full speed when mowing.

Grass should be cut often, and not too short. If grass is too long or lush it may be necessary to keep ground speed to a minimum or to cut only half the width of the mower to prevent clogging. If grass is long, operate with mower in high cutting position for first pass, cutting again in a lower position on a second pass.

Do not open the cover with mower engaged.

If a large amount of cut grass is spilling out from under deck, the tube may be plugged or the bags may be full— discontinue mowing, stop the unit, disengage the PTO, shut off the engine and then empty the catcher or clear the tube.

WARNING

ALWAYS shut off the tractor. Disengage the PTO, and allow all moving parts to stop BEFORE disconnecting or clearing tube, or emptying catcher.

Before leaving the operator’s position for any reason, engage the parking brake, disengage the PTO, stop the engine and remove the key.

To reduce fire hazard, keep the engine, rider and mower free of grass, leaves and excess grease. Do not stop or park rider over dry leaves, grass or combustible materials.

CAUTION

Before you begin operating the unit be certain you have read all of the safety and operational information of this instruction sheet, as well as the Operator’s Manual for the tractor and any other attachments.

Never operate on slopes greater than 17.6% (10°).

After Operation

Remove any debris from the screen on the underside of the lid.

The blower housing and tube should be removed for cleaning.

Inspect the grass bags for wear or damage. Make sure that there is a snug fit between mower deck, blower housing, tubes, and grass catcher cover.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

Storing the Grass Catcher

Clean the grass catcher thoroughly using a mild deter- gent (other products may damage the tube). Remove any debris from the the screen on the underside of the lid.

If paint has been scratched on metal parts, touch up with paint, or apply a thin film of oil to prevent corrosion.

Store in a dry area. Dry thoroughly before storing for a long period of time. Always store away from moisture.

3

Page 5
Image 5
Briggs & Stratton 5900703 manual General Operating Instructions

5900703 specifications

Briggs & Stratton is a well-known name in the world of small engines, particularly famous for their reliability and innovation. One of their notable products is the Briggs & Stratton 5900703, a high-performance spark plug that plays an essential role in the functioning of various small engines, including those found in lawn mowers, generators, and other outdoor power equipment.

The Briggs & Stratton 5900703 spark plug is designed to ensure optimal engine performance. One of its key features is its durability and resistance to wear and corrosion. This is crucial for maintaining engine efficiency and prolonging the lifespan of the equipment. The spark plug is built with a robust construction that can withstand the extreme conditions typically faced by outdoor power equipment.

Another significant characteristic of the Briggs & Stratton 5900703 is its superior heat range. This spark plug is engineered to provide the right thermal balance, ensuring that the engine operates smoothly without overheating. This feature is instrumental in achieving reliable ignition and combustion, which in turn improves fuel efficiency and reduces emissions, making it an environmentally friendly choice for consumers.

The design of the 5900703 also incorporates advanced firing technology that enhances ignition reliability. This allows for easier starting and smoother operation, which are essential for both casual users and professionals alike. The spark plug provides a strong and consistent spark, which is vital for optimal engine performance, especially in engines that require quick and reliable starts.

Additionally, the 5900703 is compatible with a broad range of Briggs & Stratton engines, making it a versatile choice for many users. Its easy installation process means that both hobbyists and professional technicians can replace the spark plug without complicated tools or extensive mechanical knowledge.

In summary, the Briggs & Stratton 5900703 spark plug embodies reliability, durability, and efficiency. With its advanced features and technologies, it not only enhances engine performance but also contributes to a cleaner environment and greater user satisfaction. Whether you are maintaining residential equipment or operating commercial machinery, the Briggs & Stratton 5900703 is an excellent choice that meets the demands of small engine applications.