Component Installation
A |
C |
B |
Figure 2. Install Mounting Plate
A.Mounting Plate
B.Locknuts,
C.Carriage Bolts,
Component Installation
INSTALL MOUNTING PLATE
1.Install mounting plate (A, Figure 2) to mower deck as shown. Secure with carriage bolts (C) and locknuts
(B).
LOWER CHUTE ROD AND PIN INSTALLATION
1.Insert the head of latch pin (A, Figure 3) through front hole of lower chute (D). Secure with carriage bolt (B) and locknut (C).
2.Install the rod (H) to lower chute (D) using locknuts
(G) for front holes. Tighten hardware.
3.Install the rubber strap (F) onto capscrew (I) securing with locknut (E).
HANDLE INSTALLATION
1.Install handle (A, Figure 4) using screw (C) and locknuts (B) for rear hole. Use screw (D) as shown. Tighten hardware.
| C | B |
|
| |
D |
| A |
|
| |
|
| E |
|
| F |
|
| G |
|
| G |
|
| H |
J |
| I |
Figure 3. Lower Chute to Boot Installation
A.Latch Pin
B.Carriage Bolt,
C.Locknut,
D.Lower Chute
E.Locknut, Center Lock,
F.Rubber Strap
G.Locknuts, Whiz Lock,
H.Rod, Boot Mount
I.Capscrew, Hex Head,
J.Capscrew, Hex Head, Thin,
FB
A
E
C
B
D
2.Install strap (E) to screw (D) and secure with locknut (F).
Figure 4. Handle to Tube Installation
A.Handle
B.Locknuts, KEPS,
C.Screw, Slotted,
D.Screw, Slotted,
E.Rubber Strap
F.Locknut, Center Lock,
5
