Features & Controls

Ground Speed Control Levers

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the right lever controls the right rear drive wheel.

Moving a lever forward increases the FORWARD speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

Note: The further a lever is moved away from the neutral position the faster the drive wheel will turn.

See the OPERATION section for steering instructions.

Hour Meter

The hour meter measures the number of hours the PTO has been engaged. The hour meter has a self contained power source so the total hours are always visible.

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

 

OFF

Stops the engine and shuts off the

 

 

electrical system.

 

RUN

Allows the engine to run and powers

 

 

the electrical system.

 

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

Parking Brake

Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged.

 

 

 

 

DISENGAGE

Releases the parking brake.

for

 

 

 

 

 

 

 

 

 

 

 

 

ENGAGE

Locks the parking brake.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reproduction

PTO (Power Take Off) Switch

The PTO switch engages and disengag s the mower. Pull UP on the switch to engage, and push DOWN to disengage.

12

www.snapperpro.com