Briggs & Stratton 5900785, 5900873, 5900970, IS3100Z Raise & Lower the Roll Bar, seat belt, ROLL OVER:, NEVER remove it, THE ROLL BAR IS DOWN, To lower the roll bar:, To raise the roll bar:

Operation

Raise & Lower the Roll Bar
To lower the roll bar:	C
1. Pull the hair pin clips (A, Figure 10) out of the	D
retainer pins (B).	C

2. Push or pull the top of the roll bar (C) forward against the rubber stops (D) and remove the retainer pins (B).

3. Lower the roll bar and reinstall the retainer pins and hair pin clips to secure the roll bar in the down position (see insert, Figure 10).

To raise the roll bar:

1. Pull the hair pin clips (A) out of the retainer pins				A
(B) and remove the retainer pins.
2. Raise the roll bar (C) until the rubber stops (D)			B	D
contact the upright tubes.
3. Push or pull the top of the roll bar forward against
the rubber stops and reinstall the retainer pins and
hair pin clips to secure the roll bar in the raised
position.	Reproduction
		for
			Figu e 10. Raise & Lower the Roll Bar
WARNING			A. Hair Pin Clip
			B. Retainer P n
AVOID SERIOUS INJURY OR DEATH FROM
			C. Roll Bar
ROLL OVER:
	Not		D. Rubber S op
Keep roll bar in the raised position and use
seat belt.
THERE IS NO ROLL OVER PROTECTION WHEN
THE ROLL BAR IS DOWN
Lower the roll bar only when necessary and
NEVER remove it.
Do NOT use seat belt when the roll bar is down.
Raise the roll bar as soon as clearance ermits.
Do NOT jump off if mower tips.

23