Adjustment
Procedures
Gauge Wheels
WARNING
Before checking mower, shut off PTO and engine, remove the key, and allow all moving parts to stop.
NOTICE
DO NOT remove the mower deck baffles. The baffles help prevent grass clippings from becoming airborne and plugging up the engine cooling fins.
The mower gauge wheels can be placed in several positions depending on the height of cut. When using higher cutting heights, set the wheels in the lower position. When using lower cutting heights, set the wheels in the upper position. To adjust:
1.Remove the locknut (B, Figure 17), gauge wheel (C), washer (D), and shoulder bolt (E). Change position of gauge wheel to desired height.
2.Insert shoulder bolt (E) through washers (D) gauge wheel (C), and gauge wheel bracket (A). Secure with locknut (B). Repeat steps 1 & 2 for all gauge wheels.
A
B
D
E
C
Figure 17. Fixed Bracket Gauge Wheel Adjustment
A. Gauge Wheel Bracket | D. Washer |
B. Locknut | E. Shoulder Bolt |
C. Gauge Wheel |
|
Seat Adjustment
Seat Slide Adjustment
The seat can be adjusted forward and back. Move the lever (A, Figure 18), position the seat as desired, and release the lever to lock the seat into position.
A |
Figure 18. Seat Adjustment
A. Seat Adjustment Lever
TP | 12 | 3/2007 |
