PREPARATION
11
F-030401L
Read and follow the assembly and adjustment
instructions for your mower. All fasteners are
in the parts bag. Do not discard any parts or
material until the unit is assembled.
WARNING: Before doing any
assembly or maintenance to the
mower, remove the wire from the
spark plug.
NOTE: Torque is measured in foot pounds
(metric N.m). This measurement describes
how tight a nut or bolt must be. The torque
is measured with a torque wrench.
TOOLS REQUIRED
1 Pliers
2 Adjustable open end wrenches
1 Blade type screwdriver
1 Phillips screwdriver
PARTS BAG - CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown at full size.
NOTE: Your model will not use every fastener shown on this page.
Bolt
2x81 Flange Nut
15x68
Locknut
15x116
Guide, Rope
71530
Top Bottom
Bolt
2x77
Flange Nut
15x84
Fastener, Cable
1101353
Locking Knob
71495 Standard Knob
71294