Operating the Tractor
Attaching a Trailer | Catcher Removal AND Installation | |
NOTE: Remove the hopper to attach a trailer. | WARNING | |
The maximum horizontal drawbar force allowed is 444 Newton. | ||
The maximum vertical drawbar force is 222 Newton. This | Do not operate the unit without the hopper or deflector | |
equates to a 396 lbs (180 kg) trailer on a 10 degree hill. Secure | ||
| in place. | ||
the trailer with an appropriately sized clevis pin (A, Figure 5) and | ||
clip (B). | 1. Move the catcher removal knob (C, Figure 6) forward to | |
| unlock the catcher from the rear support arms. |
2. Depress the catcher dump lock pedal (A).
A | 3. | Use the catcher lever (B) to open the catcher slightly. |
| 4. | Lift the catcher off the rear support arms. |
| 5. | Install in reverse order of removal. To assist installing the |
|
| catcher, be sure to line up the alignment marks on the |
|
| catcher and rear of the tractor. |
| B |
|
|
| 3 | B | 4 | |
396 | Lbs. | for |
|
| |
(180kg) |
|
|
| ||
3'4" | 10˚ |
|
|
| |
(1m) |
|
|
| ||
|
|
| C | ||
|
|
|
| ||
20' (6m) |
|
|
| 1 | |
Figure 5. Trailer Weight RecommendationsNot |
|
|
| ||
| A. Clevis Pin | ReproductionC. Catcher Lock Knob | ||||
| B. Clip | |||||
|
|
|
| ||
|
|
| 2 |
| |
|
|
|
| A | |
|
| Figure 6. Emptying the Hopper | |||
|
| A. Catcher Dump Pedal |
| ||
|
| B. Catcher Lever |
|
| |
18