Installation

Instructions

Engine Spacer Replacement Kit Part No. 5600094

For Ferris 27HP Kohler IS2000Z Models and Simplicity Cobalt Models

Kit Contents:

Part No.

Qty.

Description

5044062

1

Spacer, 1.13 X 1.75 X .50

5045289

1

Bolt, Crankshaft, 7/16 X 2-1/2”

5021029

1

Tie Wrap, 11” long

WARNING

Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s).

INSTALLATION

1.Park machine on a flat, level surface and engage the parking brake. Disengage the PTO switch, turn off the engine and remove the key from the ignition.

2.Remove the PTO clutch belt.

3.Cut the tie wrap that secures the PTO clutch wires (E, Figure 1) to the PTO clutch anchor bracket (G). Disconnect the PTO clutch wires from the main wire harness.

4.Remove the 5/16” nylock flange nut (D) that secures the PTO clutch anchor pad (F) to the PTO clutch (B).

NOTE: Before removing the PTO clutch observe and remember the clutch orientation to the clutch anchor pad for reinstallation later.

5.Loosen and remove the crankshaft bolt (C), the PTO clutch (B) and the crankshaft spacer (A). Discard the old crankshaft bolt and the old spacer.

6.Install the new crankshaft spacer with the rounded edge on the inside of the spacer facing up toward the pulley (H). Reinstall the PTO clutch in the same orientation that it was removed in Step #5 and secure with the new crankshaft bolt. Torque the crankshaft bolt to 65 ft-lbs (88Nm).

7.Reinstall the 5/16” nylock flange nut to secure the PTO clutch anchor pad to the PTO clutch.

8.Reconnect the PTO clutch wires to the main wire harness. Pull the wire slack away from all belts and pulleys and secure to the PTO clutch anchor bracket with the tie wrap.

9.Reinstall the PTO clutch belt.

G

 

 

H

F

 

 

A

E

B

D

C

Figure 1. Replacing the Engine Spacer

A.Crankshaft Spacer

B.PTO Clutch

C.Crankshaft Bolt

D.5/16” Nylock Flange Nut

E.PTO Clutch Wires

F.PTO Clutch Anchor Pad

G.PTO Clutch Anchor Bracket

Briggs & Stratton Yard Power Products Group

1

5402677

Copyright © 2006 Briggs & Stratton Corporation

Rev.12/2006

 

Milwaukee, WI, USA. All Rights Reserved.

TP 200-7322-00-SK-FS

Page 1
Image 1
Briggs & Stratton IS2000Z installation instructions Installation Instructions, Engine Spacer Replacement Kit Part No

5600094, 5044062, 5021029, 5402677, 5045289 specifications

The Briggs & Stratton IS2000Z is a standout in the world of zero-turn mowers, known for its innovative design and advanced technologies. This model is optimized for both residential and commercial use, combining functionality with ease of operation. One of the primary features of the IS2000Z is its powerful engine, which delivers robust performance and is engineered for efficient fuel consumption. The engine type ensures that operators can achieve a high-quality cut while minimizing fuel costs.

A key technological advancement in the IS2000Z is its fully fabricated cutting deck. This feature ensures superior durability and enhances the mower's performance in various mowing conditions. The cutting deck size, typically around 48 to 60 inches, empowers users to cover more ground in less time, making it ideal for larger lawns and landscapes.

Another notable characteristic of the IS2000Z is its responsive steering system, which features two independent levers for precision maneuverability. This system allows operators to easily navigate around obstacles and tight corners, making mowing more efficient. The ergonomic seating setup provides comfort during extended use, reducing operator fatigue.

In terms of maintenance, Briggs & Stratton have integrated user-friendly features into the IS2000Z. The mower is designed for easy access to key components, simplifying routine checks and servicing. This reliability is further enhanced by the availability of replacement parts such as 5044062 and 5402677, ensuring that users can keep their mowers in top condition with minimal hassle.

The addition of the TP 200-7322-00-SK-FS part and component compatibility adds to the IS2000Z’s appeal, providing users with options for customization and enhancement. Furthermore, the IS2000Z is constructed to withstand the rigors of professional-grade lawn care, making it a preferred choice among landscape professionals.

Overall, the Briggs & Stratton IS2000Z combines cutting-edge performance, durability, and ease of use, making it a valuable investment for anyone serious about lawn maintenance. With features tailored to meet the demands of users, the IS2000Z is designed to deliver exceptional results year after year. Whether you are a homeowner or a landscaping professional, this mower promises high efficiency and reliability in every mow.