![](/images/new-backgrounds/1276525/27652565x1.webp)
Sear Burner
Grease Tray
Igniter Cap | Battery |
Warming Rack
Cooking Grills
Heat Distribution
Plates
Back Burner
Wind Shield
Grooves |
Step 25
Insert the sear burner grease tray on tracks under sear burner in back.
Step 26
Remove igniter cap and insert battery with positive end of battery toward igniter cap. Ensure spring is in place inside igniter cap. Replace igniter cap and make sure the igniter is working properly.
Step 27
Loosen
Step 28
Place the heat distribution plates on lower level of grill body assembly directly above burners.
Step 29
Place cooking grills on support ribs directly above heat distribution plates.
Step 30
Place the warming rack on the grooves of the firebox side panels so that it sits above the cooking grills.
32