OPERATING INSTRUCTIONS

READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL BEFORE OPERATING SPOTLIGHT.

Step 1: To activate spotlight, plug the cigarette lighter adapter into a cigarette lighter receptacle.

Step 2: Depress trigger switch in handle to turn spotlight ON.

Release trigger switch to turn spotlight OFF.

WARNING: Never place spotlight lens face down when light is on or if it was recently on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and cause serious property damage. Always turn spotlight off and unplug from power source when not in use.

Step 3:

To lock trigger switch to ON, depress trigger switch and

 

 

 

slide locking button on back of handle to LOCK. To

 

 

 

unlock and turn spotlight OFF, slide locking button back

 

 

 

to UNLOCK.

 

 

 

Locking

NOTE:

The locking button can also be used to lock spotlight in

ON/OFF

Button

 

 

the OFF position to prevent accidental activation.

 

 

 

 

 

 

 

 

 

 

 

 

 

Only use a Brinkmann halogen bulb that is designed for the

To Replace Bulb

Q-Beam 700,000 CP spotlight as a replacement. Use of any other

 

bulb may result in poor performance and may damage your

 

spotlight.

Rear

 

Housing

IMPORTANT: Do not touch the glass part of bulb with fingers as

 

natural oils affect the life and performance of bulb.

 

Handle bulb by metal end only.

 

Step 1: Disconnect spotlight from power source.

 

Step 2: Remove the two screws from top and bottom of front

 

housing (see Figure 1).

 

Step 3: Holding the front housing securely, slowly remove the

 

rear housing, being careful not to pull wire connections

 

inside.

Front

 

 

Housing

 

FIGURE 1

2

Page 4
Image 4
Brinkmann 802-1745-0 owner manual Operating Instructions, Step