Smoker Box
Handle
Washer 
Spring
Door Retaining
Smoker Box
Bracket
Door 
Choose a good, cleared assembly area and get a friend to help you put your smoker together. Carefully remove all components from Smoker Box. Lay cardboard down to protect smoker finish and assembly area.
Step 1
Slide washers and spring onto latch end of handle as illustrated. Insert handle through hole in door and slide door retaining bracket over handle. Secure door retaining bracket using two M6 X 12mm Phillips head bolts. Repeat for other door.
NOTE: Door handles must be pushed in while turning handles to “CLOSE” position.
Step 2
Attach side handles to smoker using four
M6 X 12mm Phillips head bolts, star washers and M6 nuts.
WARNING: Use caution when lifting or moving smoker to prevent strains and back injuries. Moving smoker may require the help of an additional person.
NOTE: With the help of a friend, turn the smoker box upside down. Make sure door is securely latched to avoid injury.
Step 3
Attach legs to bottom of smoker using twelve M6 X 12mm Phillips head bolts.
4
