Brinkmann ENDURA owner manual Operating Instructions, SAVE THIS MANUAL FOR FUTURE REFERENCE Step

OPERATING INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Step 1

To form a hanger for the solar light, connect the hook section with one or two stand sections, depending on the height desired.

Step 2

Locate an area of solid ground where you	Hook Section	Stand Sections
can place your solar lights and insert
ground stake.

Step or press down on ground stake to aid in driving stake into ground. Make sure ground stake is inserted all the way into ground.

NOTE: Ground can be softened by soaking area with water first.

Step 3 Hanging Hook

Once ground stake is firmly in place, insert hanging hook into center hole of ground stake.

Step 4
Hang light fixture from hanging hook.
The photocell light sensor should point
away from other nighttime light sources.	Ground Stake

Step 5

Charge in direct sunlight for 10-12 FULL,	Ground Stake
SUNNY DAYS. The light will turn on
automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights
of charging and discharging) for the
battery to charge to its full capacity.

3