Brinkmann ENDURA owner manual Changing Battery, LEGACY SOLAR LIGHT Step, HAMPTON SOLAR LIGHT Step

IMPORTANT: The EPA Certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery contained in our product indicates The Brinkmann Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States

or Canada. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call

1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

Top Housing

Battery Compartment Lid

Battery

Lens

Top Housing

Hanger

Hanger Prongs

Top Housing

Battery Compartment Lid

Battery

Lens

Top Housing

Changing Battery

LEGACY SOLAR LIGHT

Step 1

Remove lens from top housing by turning lens clockwise.

Step 2

With top housing upside down (solar panel facing down), push tab on battery compartment lid and remove the lid.

Step 3

Remove battery. Replace with new

Ni-Cd rechargeable battery.

Step 4

Replace battery compartment lid.

Step 5

Attach the lens by aligning the slots with the grooves in top housing. Turn counter-clockwise to lock in place.

HAMPTON SOLAR LIGHT

Step 1

Remove hanger from top housing by gently pulling hanger prongs out of top housing.

Step 2

Remove lens from top housing by turning lens clockwise.

Step 3

With top housing upside down (solar panel facing down), push tab on battery compartment lid and remove the lid.

Step 4

Remove battery. Replace with new

Ni-Cd rechargeable battery.

Step 5

Replace battery compartment lid.

Step 6

Attach the lens by aligning the slots with the grooves in top housing. Turn counter-clockwise to lock in place.

Step 7

Replace hanger in top housing by gently pushing hanger prongs in sides of top housing.

NOTE: These lights utilize L.E.D. (Light Emitting Diode) technology. There are no bulbs to replace.

4