Fisher & Paykel OB60SL11 manual Care and cleaning, Refitting the side racks and catalytic panels

Models: OB60SL11 OB60SL9

1 68
Download 68 pages 16.25 Kb
Page 47
Image 47
Remove the catalytic panels

Care and cleaning

Remove the catalytic panels

45

Once you have removed the side racks, pull the catalytic panel toward the centre of the oven, until it is clear of the lower locating nut.

Catalytic panel

Refitting the side racks and catalytic panels

Once you have cleaned the side racks and catalytic panels, follow the instructions in the ‘Quick start guide’ under ‘First use’ to refit the catalytic panels, side racks and shelving in that order.

Drop-down upper element (OB60S9 model only)

Important!

Always turn off the oven at the wall before lowering the grill element. Make sure the oven has cooled down completely before starting.

To lower the upper element: use a flat-head screwdriver or a small coin to loosen the element fixing screw. The element will now drop down to enable cleaning.

When you have finished cleaning the oven ceiling, raise the element and screw the element fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is held securely in place.

The element itself is self-cleaning.

Fixing screw

Stud

Page 47
Image 47
Fisher & Paykel OB60SL11 Care and cleaning, Refitting the side racks and catalytic panels, Remove the catalytic panels