Choose a good, cleared assembly area and get a friend to help you to unpack and set up your firepit.
CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary.
Step 1
Attach the four table panels by using eight M6 x14mm bolts and eight M6 washers.
Step 2
Attach the front and back panels to the table assembly by using twelve M6 x 14mm bolts.
Step 3
Connect the side panel with the front and back panels by using six M6 x 14mm bolts.
Step 4
Attach the connection tube to the front and back panels by using four M4 x 10mm bolts.
Front & Back
Table Panels
Left & Right
Table Panels
Back Side
Panel
Front Side
Panel
15
